3proxy/doc/html/howtoe.html

<ul>
 <li>3APA3A 3proxy tiny proxy server HowTo
 <br>Under construction, very incomplete
 <ul>
	<li><A HREF="#COMPILE">Compilation</A>
	<ul>
		<li><A HREF="#MSVC">How to compile 3proxy with Visual C++</A>
		<li><A HREF="#INTL">How to compile 3proxy with Intel C Compiler under Windows</A>
		<li><A HREF="#GCCWIN">How to compile 3proxy with GCC under Windows</A>
		<li><A HREF="#GCCUNIX">How to compile 3proxy with GCC under Unix/Linux</A>
		<li><A HREF="#CCCUNIX">How to compile 3proxy with Compaq C Compiler under Unix/Linux</A>
	</ul>
	<li><A HREF="#INSTALL">Proxy server installation and removal</A>
	<ul>
		<li><A HREF="#INSTNT">How to install/remove 3proxy under Windows NT/2000/XP</A>
		<li><A HREF="#INST95">How to install/remove 3proxy under Windows 95/98/ME</A>
		<li><A HREF="#INSTUNIX">How to install/remove 3proxy under Unix/Linux</A>
	</ul>
	<li><A HREF="#SERVER">Server configuration</A>
	<ul>
		<li><A HREF="#SAMPLE">Where to find configuration example</A>
		<li><A HREF="#LOGGING">How to set up logging</A>
		<li><A HREF="#LOGFORMAT">How to setup logging format</A>
		<li><A HREF="#LOGANALIZERS">How to use log analizers with 3proxy</A>
		<li><A HREF="#LAUNCH">How to start any of proxy services (HTTP, SOCKS etc)</A>
		<li><A HREF="#BIND">How to bind service to specific interface and port?</A>
		<li><A HREF="#AUTH">How to limit service access</A>
		<li><A HREF="#USERS">How to create user list</A>
		<li><A HREF="#ACL">How to limit user access to resources</A>
		<li><A HREF="#REDIR">How to manage redirections</A>
		<li><A HREF="#ROUNDROBIN">How to balance traffic between few external channgels?</A>
		<li><A HREF="#CHAIN">How to manage proxy chains</A>
		<li><A HREF="#BANDLIM">How to limit bandwidth</A>
		<li><A HREF="#TRAFLIM">How to limit traffic amount</A>
		<li><A HREF="#NETLIST">How to build network lists</A>
	</ul>
	<li><A HREF="#CLIENT">Client configuration</A>
	<li><A HREF="#ADMIN">Administering and information analisys</A>
	<ul>
		<li><A HREF="#NEWVERSION">How to obtain latest 3proxy version</A>
		<li><A HREF="#NTSERVICE">How to control 3proxy service under Windows NT/2000/XP</A>
		<li><A HREF="#ERRORS">Log error codes reference</A>
	</ul>
	<li><A HREF="#QUEST">How To ask quiestion not in How To?</A>
 </ul>
<br>
 <ul>
<hr>
	<li><A NAME="COMPILE">Compilation</A>
<p>
	<ul>
		<li><A NAME="MSVC">How to compile 3proxy with Visual C++</A>
<p>
Extract source code files from 3proxy.tgz (with WinZip or another utility).
Use nmake /f Makefile.msvc command
</p>
		<li><A NAME="INTL">How to compile 3proxy with Intel C Compiler under Windows</A>
<p>
See <A HREF="#MSVC">How to compile 3proxy with Visual C++</A>
Use Makefile.intl instead of Makefile.msvc
</p>
		<li><A NAME="GCCWIN">How to compile 3proxy with GCC under Windows</A></li>
<p>
Extract source files from 3proxy.tgz (for example with tar -xzf 3proxy.tgz command if you have tar installed)
Use make -f Makefile.win command. 
If you want to use POSIX emulation Cygwin library (normally you shouldn't) - use make -f Makefile.unix instead.
Windows specific things (like installing as service) will not be available if compiled with Cygwin emulation.
</p>
		<li><A NAME="GCCUNIX">How to compile 3proxy with GCC under Unix/Linux</A></li>
<p>
Use
<pre>
make -f Makefile.Linux
</pre>
for Linux or Cygwin, Makefile.Solaris* (depending on compiler version) for Solaris
and Makefile.unix for different Unix-like OS. On BSD derivered systems make
sure to use GNU make, sometimes it's called gmake instead of make.
<br>Compilation is tested under FreeBSD/i386, NetBSD/i386, OpenBSD/i386, 
RH Linux/Alpha, Debian/i386, Gentoo/i386, Gentoo/PPC, Solaris/x86 but you
shouldn't have problems under different Solaris, BSD or linux compatible systems.
For different systems you may be required to patch Makefile or even source codes.
If you want to use ODBC support, make sure to install ODBC for unix, remove -DNOODBC
option from makefile compiler options and add ODBC library to linker variable.
</p>
	</ul>
<hr>
		<li><A NAME="CCCUNIX">How to compile 3proxy with Compaq C Compiler under Unix/Linux</A></li>
<p>
See <A HREF="#GCCUNIX">How to compile 3proxy with GCC under Unix/Linux</A>, use Makefile.ccc instead of Makefile.unix.
</p>
	</ul>
<hr>
	<li><A NAME="INSTALL">Proxy server installation and removal</A>
<p>
	<ul>
		<li><A NAME="INSTNT">How to install/remove 3proxy under Windows NT/2000/XP</A>
<p>
Unpack 3proxy.zip to any directory, for example
c:\Program Files\3proxy. If needed, create directory for storing log files,
ODBC sources, etc. Create 3proxy.cfg in the 3proxy installation directory (See <A HREF="#SERVER">Server configuration</A>).
If you use 3proxy before 0.6 Add
<pre>
service
</pre>
string into 3proxy.cfg. Now, start command prompt (cmd.exe).
Change directory to 3proxy installation and run 3proxy.exe --install:
<pre>
D:\>C:
C:\>cd C:\Program Files\3proxy
C:\Program Files\3proxy>3proxy.exe --install
</pre>
Now, you should have 3proxy service installed and running. If service is not
started, remove "service" string from 3proxy.cfg, run 3proxy.exe manually
and correct all errors.
</p><p>
To remove 3proxy run 3proxy --remove:
<pre>
D:\>C:
C:\>cd C:\Program Files\3proxy
C:\Program Files\3proxy>net stop 3proxy
C:\Program Files\3proxy>3proxy.exe --remove
</pre>
Now you can simply remove 3proxy installation directory.
</p>
		<li><A NAME="INST95">How to install/remove 3proxy under Windows 95/98/ME</A>
<p>
Unpack 3proxy.zip to any directory, for example
c:\Program Files\3proxy. If needed, create directory for storing log files,
ODBC sources, etc. Create 3proxy.cfg in the 3proxy installation directory (See <A HREF="#SERVER">Server configuration</A>).
Remove string
<pre>
service
</pre>
from 3proxy.cfg and add
<pre>
daemon
</pre>
if you want 3proxy to run in background.
Create shortcut for 3proxy.exe and place it in autostart or add
to registry with regedit.exe:
<br>HKLM\Software\Microsoft\Windows\CurrentVersion\Run</br>
Type: String
<br>3proxy = "c:\Program Files\3proxy.exe" "C:\Program Files\3proxy.cfg"<br>
You must use quotes if path contains space. If neccessary, restart Windows.
If service is not started, check log. Remove "daemon" command from 3proxy.cfg,
start 3proxy.exe manually and correct all errors.
</p>
		<li><A NAME="INSTUNIX">How to install/remove 3proxy under Unix/Linux</A>
<p>
Complie 3proxy (see <A HREF="#COMPILE">Compilation</A>). Copy
executables to any appropriate location (for example /usr/local/3proxy/sbin
for servers and /usr/local/3proxy/bin for utilities).
Create /usr/local/etc/3proxy.cfg. 
(see <A HREF="#SERVER">Server configuration</A>).
You can change default configuration file location by specifing configuration file
in 3proxy command line.
Add 3proxy to system startup scripts.
</p>
	</ul>
<hr>
	<li><A NAME="SERVER">Server configuration</A>
<p>
	<ul>
		<li><A NAME="SAMPLE">Where to find configuration example</A>
<p>
Server configuration example 3proxy.cfg.sample is in any 3proxy distribution.
</p>
		<li><A NAME="LOGGING">How to set up logging</A>
<p>
3proxy can log to stdout, file, ODBC datasource and
syslog (Unix/Linux/Cygwin only). For using ODBC under Unix/Linux you must
compile 3proxy with Unix ODBC libraries, see <A HREF="#COMPILE">Compilation</A>.
You can control logging from 3proxy.cfg for all services or you can control
logging of individual service, for example 
/usr/local/sbin/socks -l/var/log/socks.log starts SOCKS proxy with logging to file.
For universal proxy (3proxy) log file rotation and archiving is supported.
Log type is defined with "log" configuration file command or with
-l switch on individual service invokation. log or -l is stdout logging.
<pre>
	log filename
</pre>
and
<pre>
	-lfilename
</pre>
specify filename for logging
<pre>
	log @ident
</pre>
and
<pre>
	-l@ident
</pre>
specify ident for syslog logging. If filename within "log" command contains
'%' characters, it's processes as format specificator (see "logformat"). E.g.
log c:\3proxy\logs\%y%m%d.log D creates file like c:\3proxy\logs\060729.log,
date is generated based on local time.
<pre>
	log &connstring
</pre>

specifies ODBC connection string, connstring is in format
datasource,username,password (2 last are optional of
datasource does not require or already has authentication information). 
Also, you must specify logformat to build SQL query, to insert recod into
log, see <A HREF="#LOGFORMAT">How to setup logging format</A>
</p>
<p>
Rotation and archiving may be set up with log, rotate ¨ archiver commands
<pre>
	log filename LOGTYPE
</pre>
sets rotation type. LOGTYPE may be:
<ul>
	<li>M, monthely
	<li>W, weekly
	<li>D, daily
	<li>H, hourly
	<li>‘, minutely
</ul>
<pre>
	rotate NUMBER
</pre>
	specifies number of files in rotation (that is how many files to keep).
<pre>
	archiver EXT COMMAND PARAMETERS
</pre>
	Sets external archiver. EXT is extention of archived files
	(for example zip, gz, Z, rar etc) COMMAND and PARAMETERS are command
	to execute and command line PARAMETERS. Originale file is not deleted by
	3proxy, this work is left for archiver.
	You can pass original filename to archiver with %F macro and archive filename with %A.
	Examples are located in
	3proxy.cfg.sample
</p>
		<li><A NAME="LOGFORMAT">How to setup logging format</A>
<p>
	Since 0.3 version log format may be set with "logformat" command.
	First symbol of log format specifies format of date and time and
	should be L (LOCAL) or G (GMT - Grinwitch Meridian Time). Format
	string may contains some macro substitutions:
	<ul>
<li>	 %y - Year (2 digits)
<li>	 %Y - Year (4 digits)
<li>	 %m - Month (2 digits)
<li>	 %o - mOnth (3 letter abbriviation)
<li>	 %d - Day (2 digits)
<li>	 %H - Hour (2 digits)
<li>	 %M - Minute (2 digits)
<li>	 %S - Second (2 digits)
<li>	 %t - Timestamp (seconds since January, 1 1970 00:00:00 GMT)
<li>	 %. - Milliseconds
<li>	 %z - Timezone in mail format (from GMT, '+' east, '-' west HHMM), For example Moscow winter time is +0300.
<li>	 %U - Username ('-' if unknown).
<li>	 %N - Service name (PROXY, SOCKS, POP3P, etc)
<li>	 %p - Service port
<li>	 %E - Error code (see. <A HREF="#ERRORS">Log error codes reference</A>)
<li>	 %C - client IP
<li>	 %c - client port
<li>	 %R - target IP
<li>	 %r - target port
<li>	 %e - external IP address used to establish connection
<li>	 %Q - requested IP
<li>	 %q - requested port
<li>	 %I - bytes received from target
<li>	 %O - bytes sent to target
<li>	 %n - host name from request
<li>	 %h - hops  before target (if redirection or chaning is used).
	 see <A HREF="#CHAIN">How to use chains and parent proxies</A>)
<li>	 %T - service specific text (for example URL requested). %X-YT
	 where X and Y are positive numbers, only displays fields
 	 (space delimited) X to Y of the text. An example is %1-2T.
	</ul>
	Example:
<pre>
logformat "L%t.%. %N.%p %E %U %C:%c %R:%r %O %I %h %T"
</pre>
	generates something like
<p><font face="courier">
1042454727.0296 SOCK4.1080 000 3APA3A 127.0.0.1:4739 195.122.226.28:4739 505 18735 1 GET http://3proxy.ru/ HTTP/1.1
</font>
<br>(no line breaks)
</p>
<p>
	If ODBC used, logformat should specify SQL command,
	to insert record into log, for example
<p><font face="courier">
logformat "GINSERT INTO proxystat  VALUES (%t, '%c', '%U', %I)"
</font>
<br>(no line breaks)
</p>
		<li><A NAME="LOGANALIZERS">How to use log analizers with 3proxy</A>
<p>
Just make format of 3proxy logs compatible with format supported by your
favourite log analizer. Examples of compatible logformats are:
<br>
For Squid access.log:
<p><font face="courier">
&quot;- +_G%t.%. %D %C TCP_MISS/200 %I %1-1T %2-2T %U DIRECT/%R application/unknown&quot;
</p>
or, more compatible format without %D
<pre>
&quot;- +_G%t.%.      1 %C TCP_MISS/200 %I %1-1T %2-2T %U
 DIRECT/%R application/unknown&quot;
</pre>
ISA 2000 proxy WEBEXTD.LOG (fields are TAB-delimited):
<pre>
&quot;-	+ L%C	%U	Unknown	Y	%Y-%m-%d	%H:%M:%S
	w3proxy	3PROXY	-	%n	%R	%r	%D
	%O	%I	http	TCP	%1-1T	%2-2T	-	-
	%E	-	-	-&quot;
</pre>
ISA 2004 proxy WEB.w3c (fields are TAB-delimited):
<pre>
&quot;-	+ L%C	%U	Unknown	%Y-%m-%d	%H:%M:%S
	3PROXY	-	%n	%R	%r	%D	%O
	%I	http	%1-1T	%2-2T	-	%E	-
	-	Internal	External	0x0	Allowed&quot;
</pre>
ISA 2000/2004 firewall FWSEXTD.log (fields are TAB-delimited):
<pre>
&quot;-	+ L%C	%U	unnknown:0:0.0	N	%Y-%m-%d
	%H:%M:%S	fwsrv	3PROXY	-	%n	%R	%r
	%D	%O	%I	%r	TCP	Connect	-	-
	-	%E	-	-	-	-	-&quot;
</pre>
HTTPD standard log (Apache and others):
<p><font face="courier">
&quot;-&quot;&quot;+_L%C - %U [%d/%o/%Y:%H:%M:%S %z] &quot;&quot;%T&quot;&quot; %E %I&quot;
</p>
or more compatible without error code
<p><font face="courier">
&quot;-&quot;&quot;+_L%C - %U [%d/%o/%Y:%H:%M:%S %z] &quot;&quot;%T&quot;&quot; 200 %I&quot;
</p>
		<li><A NAME="LAUNCH">How to start any of proxy services (HTTP, SOCKS etc)</A>
<p>
3proxy is distributed in 2 variants: as a set of standalone modules (proxy,
socks, pop3p, tcppm, udppm) and as universal proxy server. These services are
absolutely independant, and if you use 3proxy you needn't any of standalone
modules.
<br>Standalone modules are only configurable via command line interface while
3proxy uses configuration file. Many functions, such as ODBC logging, log
rotation, access control, etc are only available in 3proxy, not in standalone
proxies.
Standalone module may be started from command line, for example:
<pre>
$/sbin/socks -l/var/log/socks.log -i127.0.0.1
</pre>
Starts SOCKS server binded to localhost ip, port 1080 with logging to
/var/log/socks.log.
You can get help for any standalone service with -? command line option.
</p><p>
If 3proxy is used you should start all services in 3proxy.cfg file. 3proxy.cfg
is executed by 3proxy as a batch file. Example of 3proxy.cfg and command syntaxys
can be found in
3proxy.cfg.sample.
<pre>
log /var/log/3proxy.log D
rotate 30
internal 127.0.0.1
external 192.168.1.1
proxy
socks -p3129
pop3p 
</pre>
Starts 3 services: HTTP PROXY, SOCKS and POP3 PROXY. Each listens localhost
interface with default port (3128 for HTTP, 1080 for SOCKS and 110 for POP3P)
except socks started with port 3129.
All logs are in file /var/log/3proxy.log (with daily date modification and
rotation). 30 last files are stored.
</p>
		<li><A NAME="BIND">How to bind service to specific interface and port?</A>
<p>
-i options specifies internal interface, -p - listening port. No space are
allowed. To bind 'proxy' service to port 8080 on interfaces 192.168.1.1
and 192.168.2.1 use
<pre>
proxy -p8080 -i192.168.1.1
proxy -p8080 -i192.168.2.1
</pre>
</p>
		<li><A NAME="AUTH">How to limit service access</A>
<p>
First, always specify internal interface to accept incoming connection with
'internal' configuration command or '-i' service command. (See
<A HREF="#LAUNCH">How to start any of proxy services (HTTP, SOCKS etc)</A>). If
no internal interface is specified your proxy will act as open one.
<p>It's also important to specify external interface to prevent access to
internal network with 'external' or -e.
<p>3proxy with configuration files allows to use authentication and
authorization for user's access. Authentication is possible by
username/password or user's NetBIOS name. Authentication type is specified by
'auth' command.  
<pre>
auth none
</pre>
Disables both authentication and authorization. You can not use ACLs.
<pre>
auth iponly
</pre>
Specifies no authentication, ACLs authorization is used.
<pre>
auth nbname
</pre>
Authentication by NetBIOS name + ACLs. NetBIOS name of 'messenger' service
is obrained before ACL validation. If no name is obtained it's assumed to be
empty. Messenger is started by default in Windows NT/2000/XP. For Win9x
WinPopUP need to be launched. This type of authentication may be spoofed
by privileged local user.
<pre>
auth strong
</pre>
Authentication by username/password. If user is not registered his
access is denied regardless of ACLs.
<p>
Different services can have different authentication levels.
<pre>
auth none
pop3p
auth iponly
proxy
auth strong
socks
</pre>

It's possible to authorize access by client IP address, IP address or requested resource,
target port, time, etc after authentication.
(See <A HREF="#ACL">How to limit resource access</A>).
</p><p>Since 0.6 version double authentication is possible, e.g.
<pre>
auth iponly strong
allow * * 192.168.0.0/16
allow user1,user2
proxy
</pre>
strong authentication will only be used if ACL requires username to deside if
access must be granted. That is, in example, strong username authentication
is not required to access 192.168.0.0/16
</p><p>0.6 version introduces authentication (username) caching to increase
productivity. It's recommended to use authentication caching with resource
or time consuming authentication types, such as nbname or external plugins
(WindowsAuthentication).
Caching can be set with 'authcache' command with 2 parameters: caching type
and caching time (in seconds). Caching type defines the type of cached access:
'ip' - after successful authentication all connections during caching time
from same IP are assigned to the same user, username is not requested.
"ip,user" - username is requested and all connections from the same IP are
assigned to the same user without actual authentication. "user" - same as above,
but IP is not checked. "user,password" - username and password are checked
against cached ones. For authentication special authentication type 'cache'
must be used.
 Example:
<pre>
authcache ip 60
auth cache strong windows
proxy -n
</pre>
</p>
Please note, that caching affects security. Never use caching for access to
critical resources, such as web administration.

		<li><A NAME="USERS">How to create user list</A>
<p>
Userslist is created with 'users' command.
<pre>
users USERDESC ...
</pre>
With a single command it's possible to define few users, or you
can use few 'users' commands. USERDESC is user description. Description
consists of three semicolon delimited parts - login, password type and
<pre>
users admin:CL:bigsecret test:CL:password test1:CL:password1
users "test2:CR:$1$lFDGlder$pLRb4cU2D7GAT58YQvY49."
users test3:NT:BD7DFBF29A93F93C63CB84790DA00E63
</pre>
Please note the usage of quotation sign: it's required to comment out $ sign
overwise used as a file inclusion macro.
Next password types are available:
<ul>
	<li>No password type: use system authentication.
	<li>CL - cleartext password
	<li>CR - crypt password, only MD5 crypt passwords are supported
	<li>NT - NT-hashed (MD4) passwords in hex, as used in pwdump or SAMBA
</ul>
NT and crypt passwords can be used to import accounts from Windows/SAMBA or
Unix. For Windows you can use pwdump family of utilities.
It's convenient to store accounts apart and include account file with $ macro.
Because for included files newlines are treated as a space, it's possible to
use atandard passwd file format:
<pre>
users $/etc/.3proxypasswd
</pre>
or
<pre>
users $"c:\Program Files\3proxy\passwords"
</pre>
It's possible to create NT and crypt passwords with mycrypt utility included
in distribution.
<br>Userlist is system-wide. To manage user access to specific service use ACLs.
</p>
		<li><A NAME="ACL">How to limit user access to resources</A>
<p>
Commands allow, deny and flush are used to manage ACLs:
<p><font face="courier">
allow &lt;userlist&gt; &lt;sourcelist&gt; &lt;targetlist&gt; &lt;targetportlist&gt; &lt;commandlist&gt; &lt;weekdaylist&gt; &lt;timeperiodlist&gt;
<br>deny &lt;userlist&gt; &lt;sourcelist&gt; &lt;targetlist&gt;  &lt;weekdaylist&gt; &lt;timeperiodlist&gt;
<br>flush
</font>
</p>
'flush' command is used to finish with existing ACL and to start new one.
It's required to have different ACLs for different services.
'allow' is used to allow connection and 'deny' to deny connection. 'allow'
command can be extended by 'parent' command to manage redirections (see <A NAME="REDIR">How to manage redirections</A>)). If ACL
is empty it allow everything. If ACL is not empty, first matching ACL entry
is searched for user request and ACL action (allow or deny) performed. If
no matching record found, connection is denied and user will be asked to
re-authenticate (requested for username/password). To prevent this request
add 'deny *' to the end of list.
<ul>
	<li>&lt;userlist&gt; - comma delimited list of users
	<li>&lt;sourcelist&gt; - comma delimited list of source (client) networks. 
		Networks can be defined as single IP address or in CIDR form
		xxx.yyy.zzz.mmm/l, where l - is the length of network mask
		(a number of non-zero bits). 192.168.1.0/24
		means network with 255.255.255.0 mask.
	<li>&lt;targetlist&gt; - comma delimited list of target (server) networks.
		In 3proxy 0.6 and above it's allowed to use hostnames with wildmasks
		in targetlist. Wildmask may only present in the begginning or at the
		end of the hostname, e.g. 
		192.168.0.0/16,www.example.com,*wrongsite.com,*wrongcontent*.
	<li>&lt;targetportlist&gt; - comma delimited list of ports. I
		It's possible to define port ranges with -, e.g. 80,1024-65535
		means port 80 and all unprivileged ports.
	<li>&lt;commandlist&gt; - the list of allowed actions
<br>		CONNECT	- establish outgoing TCP connection. e.g. POP3 or SOCKSv5
<br>		BIND - allow incoming TCP connection (SOCKSv5)
<br>		UDPASSOC - create UDP association (SOCKSv5)
<br>		ICMPASSOC - create ICMP association (not implemented)
<br>		HTTP_GET - HTTP GET request (HTTP proxy)
<br>		HTTP_PUT - HTTP PUT request (HTTP proxy)
<br>		HTTP_POST - HTTP POST request (HTTP proxy)
<br>		HTTP_HEAD - HTTP HEAD request (HTTP proxy)
<br>		HTTP_CONNECT - HTTP CONNECT, aka HTTPS request (HTTP proxy)
<br>		HTTP_OTHER - another HTTP request (HTTP proxy)
<br>		HTTP - any HTTP request except HTTP_CONNECT (HTTP proxy)
<br>		HTTPS - alias to HTTP_CONNECT (HTTP proxy)
<br>		FTP_GET - FTP get request (http, ftp proxy)
<br>		FTP_PUT - FTP put request (ftp proxy)
<br>		FTP_LIST - FTP list request (http, ftp proxy)
<br>		FTP - any FTP request
<br>		ADMIN - administration interface access
<p>
	<li>&lt;weeksdays&gt; - week days numbers or periods (0 or 7 means Sunday, 1 is Monday, 1-5 means Monday through Friday).
	<li>&lt;timeperiodlists&gt; - a list of time periods in HH:MM:SS-HH:MM:SS format. For example,
		00:00:00-08:00:00,17:00:00-24:00:00 lists non-working hours.
		
</ul>
* in ACL means &quot;any&quot;.
Usage examples could be found in 3proxy.cfg.sample.
</p>
		<li><A NAME="REDIR">How to manage redirections</A>
<p>
Redirections are usefull to e.g. forward requests from specific clients
to different servers or proxy server. Additionally, redirections are usefull
to convert proxy interface from ont format to another, e.g. requests from
SOCKS proxy can be redirected to parent HTTP proxy, or SOCKSv5 client can be
redirected to SOCKSv4 proxy.
<br>Because 3proxy understand "transparent" web request, it can be used as an
intermediate software between HTTP proxy and NAT server for transparent HTTP
forwarding, because it can convert "Web server" request issued by client to
"proxy request" required by proxy server. A simplest redirection is:
<pre>
auth iponly
allow *
parent 1000 http 192.168.1.1 3128
proxy
</pre>
All trafiic of HTTP proxy is redirected to parent proxy 192.168.1.1 port 3128.
<br>If port number is '0', IP address from 'parent' is used as external address
for this connection (that is like -eIP, but only for connections matching
'allow').
<br>Special case of redirection are local redirections. In this case both IP is
0.0.0.0 and port is 0. It's only usseful with SOCKS service. In this case no
new connection is established, but request is parsed by corresponding local
service. E.g.:
<pre>
auth iponly
allow * * * 80
parent 1000 http 0.0.0.0 0
allow * * * 21
parent 1000 ftp 0.0.0.0 0
allow * * * 110
parent 1000 pop3 0.0.0.0 0
socks
</pre>
In this case all SOCKS traffic with destination port 80 is forwarded to local
'proxy' service, destination port 21 to 'ftppr' and 110 to 'pop3pr'. There is
no need to run these services expicitly. Local redirections are usefull if
you want to see and control via ACLs protocol specific parameters, e.g.
filenames requests thorugh FTP while clients are using SOCKS.
</p>
		<li><A NAME="ROUNDROBIN">How to balance traffic between few external channgels?</A>
<p>
Proxy itself doesn't manage network level routing. The only way to control
outgoing channel is to select external interface. It's possible to make
external interface (what is usually selected with 'external' command or
'-e' option) random by using local redirection with external port 0.
<pre>
auth iponly
allow *
parent 500 http 10.1.1.101 0
parent 500 http 10.2.1.102 0
</pre>
Now external interface is randomly selected with 0.5 probability between
10.1.1.101 and 10.2.1.102. To work as expected, different default routes
must between 2 interfaces.
used
<p>
If both interface addresses are in same network, e.g. 10.1.1.101 and 10.1.1.102
and you want to select random gateway between 10.1.1.1 and 10.1.1.2, you must
control it by using routing table, in case there is no default gateway route
for Windows:
<pre>
 route add -p 10.1.1.1 10.1.1.101
 route add -p 10.1.1.2 10.1.1.102
 route add -p 0.0.0.0 mask 0.0.0.0 192.168.1.1
 route add -p 0.0.0.0 mask 0.0.0.0 192.168.1.2
</pre>
If you have no second address yet, just add it. Under Linux/Unix it's better
to use source routing.
</p>
		<li><A NAME="CHAIN">How to manage proxy chains</A>
<p>
parent command may also be used to build a proxy chains. In this case
few 'parent' commands are used for single 'allow' rule with different
weights (first argument of parent command). Chain may contain any number
of proxy servers, but it should be noted that every hope significantly
reduces productivity. It's possible to mix different types of proxy within
single chain: HTTPS (HTTP connect), SOCKS4, SOCKS5. Weight different from
1000 is used to build random chains. if weight W is below 1000, this proxy
will be used as a next chain hop with probability of W/1000. That is, if
the weight is 250 probability this proxy will be used for the next hope is
25%. 'parent' records with common weight of 1000 establish a group, one of
these record will be used for the hop with probability according to weight.
Warning: each group must have a weight even of 1000. As follows, common
weight of all 'parent' records must also be even of 1000. If common weight
of 'parent' records in te chain is 3000, chain has 3 hops and must be formed
of 3 groups. Example:
<pre>
allow *
parent 500 socks5 192.168.1.1 1080
parent 500 connect 192.168.10.1 3128
</pre>
In this case we have 1 parent proxy (1 hop) which is randomely choosen between
2 hosts: 192.168.1.1 and 192.168.10.1. 2 records form a single group.
<pre>
allow * * * 80
parent 1000 socks5 192.168.10.1 1080
parent 1000 connect 192.168.20.1 3128
parent 300 socks4 192.168.30.1 1080
parent 700 socks5 192.168.40.1 1080
</pre>
In this case we have 3 groups (3 hops in the chain). First hop is 192.168.10.1,
second hop is 192.168.20.1 and 3rd one is either 192.168.30.1 with probability
of 30% or 192.168.40.1 with probability of 70%.
</p>

		<li><A NAME="BANDLIM">How to limit bandwidth</A>
<p>
3proxy supports bandwidth filters. To manage filters bandlimin/bandlimout and
nobandlimin/nobandlimout. 'in' means incoming and 'out' - outgoing traffic.
<p><font face="courier">
bandlimin &lt;bitrate&gt; &lt;userlist&gt; &lt;sourcelist&gt; &lt;targetlist&gt; &lt;targetportlist&gt; &lt;commandlist&gt;
<br>nobandlimin &lt;userlist&gt; &lt;sourcelist&gt; &lt;targetlist&gt; &lt;targetportlist&gt; &lt;commandlist&gt;
</font>
</p>
Commands are applied to all services. Imagine bandwidth filters as a series of
pipes.  Bitrate is a pipe's width and ACLs controls the flow thorugh this pipe.
<pre>
  bandlimin 57600 * 192.168.10.16
  bandlimin 57600 * 192.168.10.17
  bandlimin 57600 * 192.168.10.18
  bandlimin 57600 * 192.168.10.19
</pre>
Create 4 separete pipes for 4 client with emulation of modem connection.
<pre>
  bandlimin 57600 * 192.168.10.16/30
</pre>
Create single pipe for all 4 clients. That is 4 clients share modem connection.
In this example:
<pre>
  nobandlimin * * * 110
  bandlimin 57600 * 192.168.10.16/32
</pre>
mail traffic from POP3 servers bypasses the pipe and has no bandwidth
limitation.
</p>
		<li><A NAME="TRAFLIM">How to limit traffic amount</A>
<p>
<p><font face="courier">
counter &lt;filename&gt; &lt;type&gt; &lt;reportpath&gt;  
<br>countin &lt;number&gt; &lt;type&gt; &lt;amount&gt; &lt;userlist&gt; &lt;sourcelist&gt; &lt;targetlist&gt; &lt;targetportlist&gt; &lt;commandlist&gt;
<br>nocountin &lt;userlist&gt; &lt;sourcelist&gt; &lt;targetlist&gt; &lt;targetportlist&gt; &lt;commandlist&gt;
<br>countout &lt;number&gt; &lt;type&gt; &lt;amount&gt; &lt;userlist&gt; &lt;sourcelist&gt; &lt;targetlist&gt; &lt;targetportlist&gt; &lt;commandlist&gt;
<br>nocountout &lt;userlist&gt; &lt;sourcelist&gt; &lt;targetlist&gt; &lt;targetportlist&gt; &lt;commandlist&gt;
</font>
</p>
<p>
You can set traffic limit per day (D), week (W), month (M), year (Y) or
absolute ('N'), as specified by 'type' argument of counterin command.
Traffic information is stored in binary file specified by 'filename' argument.
countersutil utility can be used to manage this file.
reportpath specifies location of text reports, type parameter of 'counter'
command controls how often text reports are created. amount is amount of
allowed traffic in Megabytes (MB). nocountin allows you to set exclusions.
</p>
		<li><A NAME="NETLIST">How to build network lists</A>
<p>Networks or users lists are often very huge. 3proxy doesn't currently
supports user groups, but ones can be created by the means of include files.
You can store comma-delimited lists of networks or users in the separate
file and use $ macro to insert this list into 3proxy.cfg.
3proxy comes with 'dighosts'
utility. This utility helps to grab the list of the network from HTTP page.
It may be usefull to e.g. obtain a regullary updated list of local networks
from ISP's server. A network list can be either in form of NETWORK MASK,
e.g. 192.168.1.0 255.255.255.0 or NETWORK/LENGTH, e.g. 192.168.1.0/24. You can
launch dighosts from 3proxy.cfg to be executed on every 3proxy startup or
configuration reload:
<pre>
system "dighosts http://provider/network.html local.networks"
allow * * $local.networks
allow *
parent 1000 proxy.provider 3128 *
proxy
flush
</pre>
In this example we obtain list of local networks from provider's page to
local.networks file, allow direct access to these networks and redirect all
connection to external networks to provider's proxy.
</p>
	</ul>

<hr>
	<li><A NAME="CLIENT">Client configuration</A>
<p>
<hr>
	<li><A NAME="ADMIN">Administering and information analisys</A>
<p>
	<ul>
		<li><A NAME="NEWVERSION">How to obtain latest 3proxy version</A>
<p>
Latest version of 3proxy may be obtained
<A HREF="http://3proxy.ru/">here</A>.
New version may have changes and incompatibilities with previous one in files
format or commands. Please, read CHANGELOG file and another documentation
before installing new version.
</p>
		<li><A NAME="NTSERVICE">How to control 3proxy service under Windows NT/2000/XP</A>
<p>
If installed as system service, 3proxy understands Windows service commands
for START, STOP, PAUSE and RESUME. If service is PAUSEd, no new connections
are accepted while older connections are processed. Currently there is no
support for dynamic configuration change, so, you have to restart service
completely if you have changed any configuration.

You can control 3proxy service via "Services" administration ot via "net" command:
<pre>
	net start 3proxy
	net stop 3proxy
	net pause 3proxy
	net continue 3proxy
</pre>
</p>
		<li><A NAME="ERRORS">Log error codes reference</A>
<p>
	<ul>
		<li>0 - Operation successfully complited (connection
			was closed by one of peers)
		<li>1-9 - AUTHENTICATION ERRORS
		<li>1 - Access denied by ACL (deny)
		<li>2 - Redirection (should not appear)
		<li>3 - No ACL found, denied by default
		<li>4 - auth=strong and no username in request
		<li>5 - auth=strong and no matching username in configuration
		<li>6 - User found, wrong password (cleartext)
		<li>7 - User found, wrong password (crypt)
		<li>8 - User found, wrong password (NT)
		<li>9 - Redirection data not found (should not appear)
		<li>10 - Traffic limit exceeded
		<li>11-19 - CONNECTION ERRORS
		<li>11 - failed to create socket()
		<li>12 - failed to bind()
		<li>13 - failed to connect()
		<li>14 - failed to getpeername()
		<li>20-29 - COMMON ERRORS
		<li>21 - memory allocation failed
		<li>30-39 - CONNECT PROXY REDIRECTION ERRORS
		<li>31 - failed to request HTTP CONNECT proxy
		<li>32 - CONNECT proxy connection timed out or wrong reply
		<li>33 - CONNECT proxy fails to establish connection
		<li>34 - CONNECT proxy timed out or closed connection
		<li>40-49 - SOCKS4 PROXY REDIRECTION ERRORS
		<li>50-69 - SOCKS5 PROXY REDIRECTION ERRORS
		<li>70-79 PARENT PROXY CONNECTION ERRORS (identical to 1x)
		<li>90-99 - established connection errors
		<li>90 - socket error or connection broken
		<li>91 - TCP/IP common failure
		<li>92 - connection timed out
		<li>93 - error on reading data from server
		<li>94 - error on reading data from client
		<li>95 - timeout from bandlimin/bandlimout limitations
		<li>96 - error on sending data to client
		<li>97 - error on sending data to server
		<li>98 - server data limit (should not appear)
		<li>99 - client data limit (should not appear)
		<li>100 - HOST NOT FOUND
		<li>200-299 - UDP portmapper specific bugs
		<li>300-399 - TCP portmapper specific bugs
		<li>400-499 - SOCKS proxy specific bugs
		<li>500-599 - HTTP proxy specific bugs
		<li>600-699 - POP3 proxy specific bugs
		<li>999 - NOT IMPLEMENTED
	</ul>
</p>
	</ul>
<hr>
	<li><A NAME="QUEST">How To ask quiestion not in How To?</A>
<p>
	Ask it in <A HREF="http://3proxy.ru/board4.html">3proxy forum</A>.
	Don't try to ask something before reading this document.
 </ul>

</ul>

<pre>$Id: howtoe.html,v 1.41 2009/02/02 10:04:49 vlad Exp $</pre>